“How much will it cost to respray my car?” is one of the first questions people ask about paintwork. The honest answer is that it depends on the car, the damage and the finish you want, and two jobs that look similar in a photo can take very different amounts of work. Knowing what affects the price makes it easier to compare quotes and to get an accurate one first time.

This guide explains the main factors behind car respray cost, why quotes from different bodyshops can differ, and what to send us so we can give you a clear quote. We do not publish fixed prices, because every repair is different. We agree the work and the price with you before we start.

What determines the cost of a car respray?

Most of the cost of paintwork is not the paint itself but the time spent preparing the surface, masking the car and finishing the job properly. The main things that affect the price are:

  • how many panels need painting, and which ones;
  • the condition of the existing paint;
  • any dents, scratches, cracks or rust that need repairing before painting;
  • the type of paint and how hard the colour is to match;
  • whether neighbouring panels need blending so the colour looks even;
  • how many parts need removing or masking, such as handles, trims, lights and sensors.

Each of these is explained below.

Single-panel versus multiple-panel work

The size of the job is the biggest single factor. A small area on one panel, such as a scuffed bumper corner, takes far less preparation and paint than a whole side of the car or a full respray. Each extra panel adds preparation, masking, paint and finishing time.

That said, painting one panel is not always a small job. A bonnet or roof is a large, flat area where any flaw shows, and a door may need its edges and shuts painted. Our guide to panel resprays versus full resprays explains when one panel is enough and when more of the car needs painting.

The condition of the existing paint

New paint is only as good as the surface beneath it. If the existing paint is sound, the area can be cleaned, keyed and painted. If it is cracked, flaking, faded or the clear coat (lacquer) is peeling, the failing layers have to be taken back further before any new paint goes on, which adds time.

Previous repairs can also add work. Old filler, thick layers of earlier paint or a poor previous repair sometimes need removing so the new finish does not fail later. Peeling paint on plastic bumpers has its own causes, which we explain in why bumper paint peels.

Dents, scratches and surface preparation

Preparation is where most of the labour goes. Before painting, damage has to be repaired and the surface made completely smooth:

  • Light scuffs and surface scratches may need only sanding and priming, and very light marks sometimes polish out without painting at all. Our guide on whether polishing can remove scratches explains the difference.
  • Deeper scratches through to the primer or metal need filling and priming.
  • Dents need pulling or working out and then smoothing before paint.
  • Rust must be treated properly, or it can come back through the new paint.
  • Cracked plastic, for example on a bumper, may be repairable or may need a replacement part.

The more of this a job needs, the higher the cost. If you have dents and scratches as well as paint damage, see our dent and scratch repairs.

Paint type, colour matching and blending

Solid colours, such as plain white or red, are generally the most straightforward to match. Metallic and pearl paints contain particles that reflect light, so the way the paint is applied changes how the colour looks from different angles. Some colours use several layers, which adds paint and time.

Even with the correct paint code, a car’s colour can change over years of sunlight, and the same colour can vary slightly between factories. To make a repair invisible, the new colour is often blended into the neighbouring panels, fading it out so the eye does not see a hard edge. Blending means painting part of the panels next to the damaged one as well, which adds to the work. If you know your car’s paint code, tell us when you ask for a quote.

Labour and material costs

A respray involves more steps than most people expect: cleaning, removing or masking fittings, repairing, sanding, priming, painting the colour, applying the clear coat, drying, and then flatting and polishing where needed. Labour is the largest part of most paintwork quotes for this reason.

Materials include primers, paint, clear coat, fillers, abrasives and masking materials. The amount used depends on the size of the area, the colour and the number of coats. Replacement parts, such as clips, trims or a new bumper, are extra where they are needed.

Why can two respray quotes differ so much?

If you get more than one quote, the prices may be quite different. That does not always mean one garage is expensive. Quotes often differ because they include different work. Things to compare:

  • The scope: is it a small repair to part of a panel, the whole panel, or several panels?
  • Blending: does the quote include blending into the neighbouring panels for a better colour match?
  • Removing versus masking: are handles, lights and trims removed, or masked in place?
  • Repair or replace: is a damaged panel or bumper being repaired, or replaced with a new part?
  • Preparation: is failing paint or an old repair being taken back properly, or painted over?
  • What the quote is based on: photos only, or an inspection of the car?

Ask each bodyshop what is included, so you are comparing like with like.

What photos should you send for a quotation?

Good photos help us understand the damage and give you a clearer idea of the options before you visit. As a starting point, send:

  • one photo of the whole side or end of the car, so we can see where the damage is;
  • close-ups of the damage from two angles, in good daylight;
  • your car’s make, model, colour and paint code if you know it.

Our guide to taking photos for a bodywork quote explains more.

When is an in-person inspection needed?

Photos are a good start, but they cannot show everything. We may need to see the car before confirming a price if:

  • the damage is deep, or there may be damage behind a bumper or panel that a photo cannot show;
  • there is rust, cracked plastic or a previous repair;
  • the colour is metallic, pearl or multi-layer and needs careful matching;
  • parking sensors, lights or other fittings are near the damage.

If an inspection is needed, we will tell you, and we agree the work and the price with you before starting.

Car resprays in Birmingham

We carry out paintwork and resprays at our garage on Springfield Road, Birmingham B13, for drivers across Birmingham. Every job is masked, prepared and painted in our paint area. For more about how a single panel is repaired and painted, see our article on car door resprays.

Frequently asked questions

How much does it cost to respray a bumper?

It depends on the size of the damage, whether the bumper has scuffs, cracks or peeling paint, the colour, and whether sensors or trims need removing. A bumper is often one of the quicker panels to paint, but cracks or failing paint add work. Send us photos for a quote.

Is it cheaper to respray one panel than the whole car?

Painting one panel is usually much less work than a full respray, as long as the rest of the paint is in good condition. Blending into the panels next to it may still be needed for a good colour match.

Can you give me a price over the phone?

We can talk you through the likely options, but we need to see photos, and sometimes the car, before giving a price. That way the quote reflects the actual work.

Does the colour of my car affect the cost?

It can. Metallic, pearl and multi-layer colours usually take more care and time to match than solid colours, and may need more blending.

Why is preparation so important?

Paint shows every flaw underneath it. Proper preparation is what makes the finish look right and last, which is why it makes up much of the work.

Get a respray quote

Send us photos for a bodywork quote: one of the whole side or end of the car and close-ups of the damage from two angles in good daylight. You can also call or WhatsApp us on 07300 506756. Directions and opening hours are on our contact page.